Certification Exam Prep Questions For
(300-101) Implementing Cisco IP Routing (ROUTE v2.0)
QuickStart is now offering assessment questions for Implementing Cisco IP Routing (ROUTE v2.0) (300-101). Whether you are deciding which exam to sign up for, or simply want to practice the materials necessary to complete certification for this course, we have provided a practice assessment to better aid in certification. 100% of the questions are real questions; from a recent version of the test you will take for Implementing Cisco IP Routing (ROUTE v2.0) (300-101).
A network engineer notices that during periods of congestion transmission rates of senders of TCP traffic sharply increase and decrease simultaneously. What are the causes of this condition?
- A. global synchronization
-
Correct!
- B. tail drop
-
Incorrect.
- C. random early detection
-
Incorrect.
- D. queue management algorithm
-
Incorrect.
Which three problems streams within a network with no Q08 result from application mixing of UDP and TCP? (Choose three.)
- A. starvation
-
Correct!
- B. jitter
-
Incorrect.
- C. latency
-
Correct!
- D. windowing
-
Incorrect.
- E. lower throughput
-
Correct!
Which method during the migration process allows IPv4 and IPv6 to work together without requiring both to be used for a single connection?
- A. dual-stack method
-
Correct!
- B. 6to4 tunneling
-
Incorrect.
- C. GRE tunneling
-
Incorrect.
- D. NAT-PT
-
Incorrect.
Which statement is true about the use of tunneling to migrate to IPv6?
The command clear IP route is executed by a network administrator. This command clear and rebuild which two tables? (Choose two.)
Which switching method when entries are present in the output of the command show ip cache is used?
- A. fast switching
-
Correct!
- B. process switching
-
Incorrect.
- C. Cisco Express Forwarding switching
-
Incorrect.
- D. cut-through packet switching
-
Incorrect.
Which two actions on a router to enable and use window scaling must you perform? (Choose two.)
- A. ip tcp window-size 65536 execute this command.
-
Correct!
- C. ip tcp queuemax execute this command.
-
Incorrect.
- D. On the remote host Set TCP options to "enabled".
-
Incorrect.
Which three TCP enhancements with TCP selective acknowledgments can be used? (Choose three.)
- A. header compression
-
Incorrect.
- B. explicit congestion notification
-
Correct!
- C. keepalive
-
Correct!
- D. time stamps
-
Correct!
To measure UDP performance and notices that packets on one router have a higher one-way delay compared to the opposite direction a network administrator uses IP SLA. This scenario describe which UDP characteristic?
- A. latency
-
Correct!
- B. starvation
-
Incorrect.
- C. connectionless communication
-
Incorrect.
- D. nonsequencing unordered packets
-
Incorrect.
UDP dominance does occur under which condition?
- A. when TCP traffic is as UDP in the same class
-
Correct!
- B. When a lower priority queue are assigned to UDP flows
-
Incorrect.
- C. when WRED is enabled
-
Incorrect.
- D. To block TCP traffic when ACLs are in place
-
Incorrect.
Which task, in a virtual private dialup network group must be completed prior to enabling PPPoE?
- A. Disable CDP on the interface.
-
Incorrect.
- B. Execute the vpdn enable command.
-
Correct!
- C. Execute the no switchport command.
-
Incorrect.
- D. Enable QoS FIFO for PPPoE support.
-
Incorrect.
A network engineer has been asked to ensure that the PPPoE connection is authenticated using an encrypted password and is established. In combination with PPPoE which technology can be used for authentication in this manner?
PPPoE is required by a corporate policy to be enabled and with the ISP to maintain connection, even if no interesting trafficexists. This task can be accomplish by which feature?
- A. TCP Adjust
-
Incorrect.
- B. Dialer Persistent
-
Correct!
- C. PPPoE Groups
-
Incorrect.
- D. half—bridging
-
Incorrect.
Authentication information in clear text is send by which PPP authentication method?
To request the next-hop protocol address which protocol uses dynamic address mapping for a specific connection?
- A. Frame Relay inverse ARP
-
Correct!
- B. static DLCI mapping
-
Incorrect.
- C. Frame Relay broadcast queue
-
Incorrect.
- D. dynamic DLCI mapping
-
Incorrect.
Which of the two phases from the following composed PPPoE?
- A. Active Authentication Phase and PPP Session Phase
-
Incorrect.
- B. Passive Discovery Phase and PPP Session Phase
-
Incorrect.
- C. Active Authorization Phase and PPP Session Phase
-
Incorrect.
- D. Active Discovery Phase and PPP Session Phase
-
Correct!
With an interface a router that is configured with ipv6 address autoconfig also has a link-local address assigned. When a router is present to obtain a global unicast address which message is required?
- A. DHCPV6 request
-
Incorrect.
- B. router-advertisement
-
Correct!
- C. neighbor-solicitation
-
Incorrect.
- D. redirect
-
Incorrect.
To use EUI-64 an engineer has configured a router, and was asked to document the IPv6 address of the router. The router has the following interface parameters:
• mac address C601.420F.OOO7
• subnet 20012D88202122/64
To the documentation, which IPv6 addresses should the engineer add?
- A. 2001:D8820212C601242FF2FEOF27
-
Correct!
- B. 20012D8820212FFFF2C601:420F27
-
Incorrect.
- C. 20012D8820212FE802C6012420F27
-
Incorrect.
- D. 20012D8820212C601242FE2800F27
-
Incorrect.
An IPv6 traffic filter was configured for security purposes on the local router under various interfaces. However, shortly OSPFV3 neighbor adjacencies were lost, after implementing the traffic filter. What caused this issue?
- B. To the traffic filter to allow OSPFV3 to work properly the global anycast address must be added.
-
Incorrect.
- D. Only on SVIs IPv6 traffic filtering can be implemented.
-
Incorrect.
What is the purpose of the command autonomous-system {autonomous-system-number}?
- B. In a VRF, it sets the BGP autonomous system number.
-
Incorrect.
What is on a Frame Relay point-to-point network the default OSPF hello interval?
Which prefix by the command ip prefix-list name permit 10.8.0.0/16 ge 24 le 24 is matched?
- A. 10.9.1.0/24
-
Incorrect.
- B. 10.8.0.0/24
-
Correct!
- C. 10.8.0.0/16
-
Incorrect.
- D. 10.8.0.0/23
-
Incorrect.
After you review the output of the command show ipv6 interface brief, you see that into the address several IPv6 addresses have the 16-bit hexadecimal value of "FFFE" inserted. What do you conclude about these IPv6 addresses based on this information?
- D. The local flag/ IPv6 universal (bit 7) was flipped.
-
Incorrect.
From a local host on the IPv6 segment, a packet capture log indicates that several router solicitation messages were sent. What is the expected acknowledgment and its usage?
- Home
- Practice Exam - Implementing Cisco IP Routing ROUTE v2.0
Practice Exam - Implementing Cisco IP Routing ROUTE v2.0
More Information:
- Learning Style: On Demand
- Learning Style: Practice Exam
- Difficulty: Beginner
- Course Duration: 1 Hour
- Course Info: Download PDF
- Certificate: See Sample
Contact a Learning Consultant
Need Training for 5 or More People?
Customized to your team's need:
- Annual Subscriptions
- Private Training
- Flexible Pricing
- Enterprise LMS
- Dedicated Customer Success Manager
Course Information