CCNA(200-125) Cisco Certified Network Associate (CCNA) Routing and Switching Training Boot Camp v3.0
QuickStart is now offering assessment questions for CCNA Cisco Certified Network Associate: Routing and Switching Training Boot Camp v3.0 (200-125). Whether you are deciding which exam to sign up for, or simply want to practice the materials necessary to complete certification for this course, we have provided a practice assessment to better aid in certification. 100% of the questions are real questions; from a recent version of the test you will take for CCNA Cisco Certified Network Associate: Routing and Switching Training Boot Camp v3.0 (200-125).
In static NAT, which device is used to translate the private IPv4 address into a public IPv4 address?
- A. Destination PC
-
Correct!
- B. Cloud
-
Incorrect.
- C. Source PC
-
Incorrect.
- D. Switch
-
Incorrect.
- E. Router
-
Correct!
- F. NAT server
-
Incorrect.
Your subnet the network 192.168.1.0/24 to four /26 networks. You are doubtful which usable address range you should use for the third subnet. What would be advisable?
- A. 192.168.1.128 to 192.168.1.192
-
Incorrect.
- B. 92.168.1.193 to 192.168.1.254
-
Incorrect.
- C. 192.168.1.65 to 192.168.1.126
-
Incorrect.
- D. 192.168.1.192 to 192.168.1.255
-
Incorrect.
- E. 192.168.1.64 to 192.168.1.127
-
Incorrect.
- F. 192.168.1.129 to 192.168.1.190
-
Correct!
You have a Cisco IOS router sharing a connection with your ISP, and on which you are configuring static NAT. You need to translate the private IP of 10.1.1.10 to 203.113.5. Which command do you need to issue on the interface that is connected to the service provider?
- A. ip nat outside
-
Correct!
- B. ip nat pool NAT_POOL 203.0.113.5
-
Incorrect.
- C. ip nat inside
-
Incorrect.
- D. ip nat inside source static 10.1.1.10 203.0.113.5
-
Incorrect.
You want to store your CISCO IOS image in a TFTP server while creating a backup. Which command will you use?
- A. copy tftp nvram
-
Incorrect.
- B. copy nvram tftp
-
Incorrect.
- C. copy tftp flash
-
Incorrect.
- D. copy system tftp
-
Incorrect.
- E. copy flash tftp
-
Correct!
- F. copy tftp system
-
Incorrect.
- -->
At your workstation you have received a complaint that the internet is having issue. You accelerate an
issue and ask your subordinate to investigate. He checks the router and finds that it is off by some
minutes. He configures NTP on the router just to get time from a Stratum 2 on the Internet. He has
found that there is a huge time difference and synchronizing for NTP is taking time on the local router.
Thus, to speedup synchronization process, he uses NTP command on the router to synch the time with
the time on the time provider.
Name the NTP term which best describes this process?
One of your daily task is to confirm the time on the router. One day, you find that it is off by about 10
minutes. In order to fix the issue, you get time from a Stratum 2-time provider through Internet by
configuring NTP on the router. Though, NTP would have taken few minutes to synch the time on the
router. Time has been successfully synching after a few minutes.
Name the NTP term which best describes this process?
You have received a router back from one of your client with a complaint that a router has a fault. The
client stated that a router is having a configuration issue that is it automatically setting on default and
rebooting to setup mode even though the correct values that startup-config contains have been verified.
You have checked a router and figured out the source of the problem. Could you please select what you
have figured?
- A. There is no space available in NVRAM.
-
Incorrect.
How will you prevent STP from forwarding loops at OSI Layer 2?
- A. port blocking
-
Correct!
- B. TTL
-
Incorrect.
- C. MAC address forwarding
-
Incorrect.
- D. collision avoidance
-
Incorrect.
What is true about static and dynamic routes?
Name the CISCO IOS command which indicate that interface GigabitEthernet 0/0 has been configured through DHCP?
- A. show ip interface GigabitEthernet 0/0 brief
-
Incorrect.
- B. show interface GigabitEthernet 0/0
-
Incorrect.
- C. show ip interface GigabitEthernet 0/0 dhcp
-
Incorrect.
- D. show ip interface dhcp
-
Incorrect.
- E. show ip interface GigabitEthernet 0/0
-
Correct!
- Home
- Practice Exam - Cisco Certified Network Associate
Practice Exam - Cisco Certified Network Associate
More Information:
- Learning Style: On Demand
- Learning Style: Practice Exam
- Difficulty: Beginner
- Course Duration: 1 Hour
- Course Info: Download PDF
- Certificate: See Sample
Contact a Learning Consultant
Need Training for 5 or More People?
Customized to your team's need:
- Annual Subscriptions
- Private Training
- Flexible Pricing
- Enterprise LMS
- Dedicated Customer Success Manager
Course Information