Can you identify the routing methodology being used currently?

Identify a statement from the options below that stand true about the connectivity.

Can you identify the device on which the fault condition exists?

Can you identify the technology to which the fault condition is related?

Which two commands issued on Corporate Router would resolve the fault condition that currently exists? (Choose two.)

Can you identify from the options below the interior routing protocol that is believed to be a link state routing protocol?

Can you identify two main advantages FlexStack-Plus has when compared to FlexStack? (opt any TWO)

You are performing a path trace for which you use APIC-EM. Can you identify the four optional statics that are available? (opt any THREE)

You are required to have internet connectivity for one of your branch office configured over an ADSL connection. A dynamically assigned IP address will be provided by your internet service provider to be used for your external connection. Network Address Translation (NAT) will be configured on the router. You will have to configure the externally facing Ethernet interface and the Dialer interface to complete the external connection configuration. Can you identify the two interface configuration mode commands that will help in properly configuring the externally facing Ethernet interface?

Can you identify three statements that stand true about routing protocol neighbor authentication on Cisco routers? (opt any THREE)

Bridge ID (BID) is used by Spanning Tree Protocol (STP) to elect a Root Bridge dynamically. Can you identify the two parts BID is composed of? (opt any TWO)

In the debugs of a ppp negotiation process between two routers, following message is found: Phase is ESTABLISHING. Finish LCP Can you identify the next message that can confirm the negotiation status?

Choose an option from below that justifies a controller’s purpose with respect to its relation with data center infrastructure management?

Choose from below two definitions that best describe valid Link Aggregate Control Protocol trunking types? (opt any TWO)

You are working for an organization as a network administrator. You are located at the head office and your organization has a branch office. You are required to use Cisco routers in order to establish a Point-to-Point Protocol (PPP) WAN link. The WAN link is to be configured between the headquarters and the remote branch office. The security policy directs a Challenge-Handshake Authentication Protocol (CHAP) to be configured on the PPP link. Identify three statements from below that are true while analyzing the CHAP processing between the routers. (Opt any THREE)

The Extended System ID portion of a Spanning Tree Protocol (STP) Bridge ID (BID) is used to identify what of the following?

Can you identify three ways you can adopt to configure EtherChannel groups? (opt any THREE)

The following IP addresses have been used to configure router R1: GO/1: 192.168.91.6/29 GO/2: 192.168.92.1/30 Default route: 192.168.92.21 using GO/1 PC1 is connected to GO/1 and these IP addresses are assigned to PC1: IP address: 192.168.91.5/29 Default gateway: 192.168.91.6 Can you identify what is causing the problem knowing that PC1 is failing to ping a network behind R1?

Can you identify the framework used in wireless and wired networks for the purpose of key distribution and authentication?

Identify the administrative distance value that you think is correct.

A switch has multiple trunk connections to a shared Local Area Network (LAN) segment. Can you identify the Rapid Spanning Tree Protocol (RSTP) port role that exists only in this situation?